Aussie CCTV Cams
CAT6 vs coax CCTV cable installation in an Australian home roof space

CAT6 vs Coaxial Cable for CCTV: Costs & Guide Australia

5 min read · Published 12 Oct 2026 · By the Aussie CCTV team

CAT6 vs coaxial cable for CCTV: CAT6 typically costs $2–$6 per metre installed and supports PoE IP cameras up to 100m, while coax suits older analogue systems. For most Newcastle and Adelaide homes and businesses, CAT6 is the smarter long-term investment.

Key Takeaways

  • CAT6 is the standard for new CCTV installations across Australia, carrying power and data via PoE over runs up to 100 metres.
  • Coax remains viable for older analogue systems, especially where existing cabling can be reused to cut costs.
  • Typical installed CCTV cabling costs range from $150–$300 per camera point depending on cable type and property layout.
  • Australian roof spaces and coastal conditions in Newcastle and Adelaide demand UV-stable, heat-rated outdoor cable.
  • Cabling work must comply with the Privacy Act 1988 and state surveillance laws; use a licensed installer.

What Is the Difference Between CAT6 and Coaxial Cable?

The short answer: for most new CCTV installations in Australia, CAT6 beats coaxial cable on cost, quality and future-proofing. CAT6 carries both power and data to IP cameras through PoE over runs up to 100 metres, while coax is largely limited to older analogue systems. Typical installed costs run $150–$300 per camera point, so choosing the right cable now saves money later.

Choosing between the two is not just a technical detail. The cable you select affects picture quality, installation labour, reliability in Australian conditions and how easily your system can grow with your needs. This guide breaks down the differences so you can make an informed decision for your home or business.

Why Has CAT6 Become the Standard for Modern CCTV?

CAT6 is a twisted-pair Ethernet cable designed for network data. In a CCTV context, it connects IP cameras to a network video recorder (NVR) or network switch. Thanks to PoE, a single CAT6 run can deliver both the data connection and the electrical power a camera needs, eliminating the need for a separate power lead at each camera location.

Coaxial cable, by contrast, is the traditional medium for analogue CCTV. Video signals travel from the camera back to a digital video recorder (DVR), while power is supplied through a separate cable. Even modern HD-over-coax systems, which squeeze higher resolutions out of older cabling, still generally require that separate power run.

The practical difference comes down to system architecture. CAT6 treats every camera as a device on your network, opening the door to remote viewing, intelligent analytics and simple expansion. Coax treats each camera as a dedicated video feed, which is simpler in some ways but far less flexible.

When Does Coax Still Make Sense for a CCTV Upgrade?

CAT6 has become the standard for professional CCTV because it matches the way modern security systems are built. IP cameras from brands such as Hikvision, Dahua, Uniview and Axis are designed from the ground up to run over network cabling, and CAT6 provides the bandwidth they need for high-resolution video and advanced features.

With CAT6 in place, you can run 4K cameras, AI-powered motion detection, number plate recognition, remote viewing from your phone and intelligent video search without the cabling becoming a bottleneck. PoE simplifies [[installing-cctv-on-a-double-storey-home-ladders-heights-and-safety-rules|installation]] further by sending power and data down the same lead, which means fewer cables in your ceiling, cleaner cable routes and less labour on site.

CAT6 also keeps your options open. If you want to add cameras later, move to higher resolutions, or integrate your CCTV with alarms, intercoms or access control, network cabling makes all of that significantly easier. For Australian conditions, quality CAT6 also performs reliably when installed correctly in roof spaces, conduits and protected [[uv-damage-to-cctv-cabling-why-cheap-cable-fails-in-the-australian-sun|outdoor]] runs.

  • Supports 4K and higher-resolution IP cameras
  • Carries power and data together with PoE
  • Better suited to smart analytics and remote viewing
  • Easier to expand or upgrade in the future
  • Ideal for new homes, offices, warehouses and retail sites

How Do Cost, Distance and Performance Compare Between CAT6 and Coax?

Coax is not obsolete, but it is more limited. It is most commonly found in older analogue CCTV systems, particularly in properties where the cable is already installed and still in good condition. If you are replacing cameras like-for-like and want to keep costs down, reusing existing coax can sometimes be a practical short-term move.

Modern HD-over-coax systems can deliver respectable image quality over existing cable, which may appeal to budget-conscious property owners. However, coax usually needs a separate power cable for each camera, and it does not offer the flexibility of a networked IP system. It is also less future-proof if you later want advanced analytics, higher resolutions or integration with other security technologies.

In short, coax can still work, but it is usually a compromise. If you are investing in a new CCTV system for long-term protection of your property, CAT6 is generally the smarter choice.

Should You Choose CAT6 or Coax for Your Property Type?

The right cable is not just about picture quality. It also affects installation time, ongoing maintenance, upgrade costs and how dependable the system will be over the years. In Australian homes and commercial sites, those practical factors matter just as much as the camera specifications.

CAT6 is often more cost-effective overall because it reduces cabling complexity and supports more features without additional hardware. It also performs well over longer runs when installed correctly, which matters in larger homes, warehouses, farms and commercial buildings. Coax can be cheaper upfront in a basic analogue replacement, but it may cost more down the track if you outgrow the system and need to re-cable anyway.

Weather matters too. In coastal areas, salt air can be harsh on connectors and fittings. In roof spaces, summer heat can be brutal on cheaper cable. In storm-prone regions, surge protection and careful cable routing are essential. A professional installer will select the right cable type, conduit and fittings for your specific environment, not just the camera spec sheet.

Can CCTV Cabling Handle Australian Climate Conditions?

The best cable depends on your property, your goals and whether you are starting fresh or upgrading an existing system. A suburban home may only need a straightforward CAT6 IP setup with a handful of cameras and remote viewing. A warehouse, retail store or construction site may require a more robust design with multiple camera types, longer cable runs and careful network planning.

If you already have coax in place, a licensed installer can assess whether it is worth reusing or whether a full CAT6 upgrade will save money over time. If you are building new, renovating or fitting out a commercial space, CAT6 is usually the clear winner because it supports the latest camera technology and leaves room for growth.

A good installer looks at the whole picture: camera placement, cable routes, power requirements, network design, weather exposure and future expansion. That is how you end up with a system that works properly on day one and keeps working for years.

Are There Legal Requirements for CCTV Cabling in Australia?

Australia's climate puts unique demands on [[surface-mounted-vs-recessed-cabling-which-suits-your-home|CCTV cabling]]. Roof spaces can exceed extreme temperatures in summer, which degrades inferior cable insulation over time. Outdoor runs need UV-rated conduit or protection from direct sunlight, and connections should be sealed against moisture and dust.

In coastal suburbs, corrosion of connectors and fittings is a real concern, so marine-grade or weatherproof components are worth the small extra cost. In areas prone to electrical storms, surge protection on both the network and power sides of the system protects your investment.

It is also worth noting that in Australia, security system cabling work may need to be carried out or supervised by appropriately licensed technicians depending on the scope of the job. Using a licensed installer ensures the work is compliant, insurable and done to a standard that will last.

Why Plan for Future Upgrades With CAT6 Now?

One of the strongest arguments for CAT6 is what it enables down the track. Because IP cameras sit on your network, adding a camera can be as simple as running one new cable to the nearest switch. Upgrading a camera to a higher resolution often requires no cabling changes at all, provided the original run was quality CAT6.

Network cabling also opens the door to integration. Modern systems can tie CCTV into alarm panels, intercoms, access control and smart home platforms, all sharing the same network infrastructure. With coax, each of those integrations becomes harder and more expensive.

If you are cabling a new build or renovation, running CAT6 to every likely camera position — even if you do not install a camera there immediately — is a low-cost decision that pays off for years. Cable is cheap; labour to retrofit it later is not.

How to Get Professional Advice for Your CCTV Cabling

Every property is different, and the right answer depends on your layout, existing infrastructure, budget and plans. A licensed CCTV installer can inspect your site, test any existing cabling, and design a system that balances performance and cost.

Whether you are protecting a family home, a retail shop, a warehouse or a rural property, getting the cabling right from the start is the single best way to avoid costly rework. Ask your installer about cable quality, PoE budgets, conduit routes and surge protection — a good installer will welcome those questions.

For homeowners comparing CAT6 vs coaxial cable for CCTV, the numbers matter as much as the technology. A single roll of quality outdoor-rated CAT6 costs roughly $120–$250 for 305 metres, while RG59 coax with a power pair sits around $100–$200. The real difference appears in labour: because CAT6 needs only one cable per camera, installers in [[/newcastle|Newcastle]] NSW often complete a four-camera home system in a single day, trimming $200–$500 off the bill compared with running separate power and video lines.

Distance is where the two cables genuinely diverge. CAT6 reliably delivers full-resolution IP video at 100 metres without extenders, which covers most suburban homes and small retail shops. Coax with HD-over-coax technology stretches further — up to 300 metres with RG59 and beyond with RG11 — but image quality plateaus at lower resolutions than modern 4K IP cameras deliver. For large warehouses or farm sheds in regional South Australia, that extra reach can still justify coax.

Climate should shape your cable choice too. Newcastle's coastal humidity corrodes cheap connectors within a few years, so marine-grade RJ45 boots and stainless mounting hardware are worth the small premium. [[/adelaide|Adelaide]]'s dry summer heat pushes roof-space temperatures past 60°C, degrading budget PVC insulation until signal dropouts appear. Insist on UV-stabilised PE-sheathed cable rated for direct sun if any run travels along eaves, brick walls or an exposed roofline.

There are legal angles as well. Under the Privacy Act 1988 and the Surveillance Devices Act (NSW), cameras must not record private areas of neighbouring properties, and signage is required in workplaces under workplace surveillance rules. In South Australia, similar surveillance laws apply to businesses monitoring staff. While low-voltage CCTV cabling itself doesn't require an electrical licence, a licensed security installer ensures compliance and clean workmanship.

Finally, think resale value. A documented CAT6 backbone with labelled wall plates and a patch panel signals a professional installation to buyers and future technicians. Whether you manage a commercial warehouse, a retail storefront or a family home, get a quote from Aussie CCTV Cams — we service Newcastle NSW and Adelaide SA and will spec the right cable for your property, climate and budget.

CAT6 vs Coaxial Cable for CCTV: Key Differences

Feature CAT6 Coaxial (RG59/RG11)
Max distance Up to 100m per run Up to 300m+ (HD-over-coax)
Power delivery PoE — one cable for power & data Separate power cable required
Installed cost per camera $150–$300 $180–$350
Best suited to New IP systems, homes & businesses Older analogue upgrades, long runs

Frequently asked questions

How much does it cost to re-cable a four-camera CCTV system from coax to CAT6 in Newcastle NSW?

Most Newcastle homes pay $800–$1,600 to replace coax runs with outdoor-rated CAT6 across four cameras, including new PoE-capable NVR connections, connectors and labour. Costs rise if walls are double-brick or cable must be chased through masonry rather than routed through the roof space. Aussie CCTV Cams offers free on-site quotes so you know the exact figure before work begins.

Does CAT6 really save money compared with coaxial cable for CCTV installations in Adelaide SA?

Yes, usually. Because CAT6 delivers power and data over one cable via PoE, installers avoid running separate 12V power lines, cutting labour time by 20–30%. Cable itself costs $2–$6 per metre installed versus $3–$7 for coax plus power. Over a typical six-to-eight-camera Adelaide business fit-out, that difference commonly saves $400–$900.

How far can I run CAT6 to a CCTV camera before the signal drops out?

The IEEE standard limits Ethernet runs to 100 metres, and that applies fully to PoE-powered IP cameras — beyond that, voltage drop causes reboot loops and packet loss. If a camera sits further away, such as a farm gate or warehouse perimeter, options include a midspan PoE extender, fibre backhaul, or switching that zone to HD-over-coax, which reaches 300+ metres.

Which CCTV cable survives Newcastle's coastal salt air better — CAT6 or coax?

Both degrade quickly if you use indoor-grade cable outdoors. Salt-laden coastal air corrodes copper braid shields on coax and unprotected RJ45 contacts on CAT6 within two to three years. Choose CAT6 with a UV-stabilised polyethylene jacket, gel-filled flooding compound and weatherproof boots, plus dielectric grease on connectors — this combination routinely lasts 10+ years near the coast.

Do South Australian surveillance laws affect how I position my CCTV cameras in Adelaide?

Yes. Under the Surveillance Devices Act and related SA legislation, cameras must not capture neighbouring private land, and businesses monitoring employees must follow workplace surveillance notification requirements. The federal Privacy Act 1988 also governs how recorded footage is stored and disclosed. Position cameras toward your own boundaries and post clear signage to stay compliant.

Can I reuse my existing RG59 coax when upgrading to a modern CCTV system?

Sometimes. HD-over-coax kits (TVI/CVI/AHD) let you keep RG59 runs while gaining 1080p or even 4MP resolution, which suits properties where re-cabling is impractical. However, you lose PoE, remote firmware updates and easy network expansion. An installer can test your existing coax with a cable certifier to confirm it still meets impedance and shielding standards before recommending reuse.

Is shielded CAT6 worth the extra cost for CCTV in a commercial warehouse?

For warehouses with forklift chargers, motors and fluorescent high-bays, yes — unshielded CAT6 can pick up electromagnetic interference that causes video artefacts and dropped frames. F/UTP shielded CAT6 costs about 30–50% more per metre but grounds out that noise. Bond the shield at the NVR end only, and keep cable trays at least 300mm from high-voltage conduits.

Do I need a licensed installer to run CCTV cabling at my property in Australia?

Low-voltage data cabling like CAT6 falls outside electrical licensing in most cases, but connecting cameras to mains power does require a licensed electrician. More importantly, using a licensed security installer ensures your system complies with the Privacy Act 1988, state surveillance legislation and insurer requirements — many policies void claims on non-compliant DIY installs.

Related installation services

Get a free on-site quote

Licensed installers across Newcastle, the Hunter Region and Adelaide. Fixed written quotes, no hidden fees, no pressure.

Call 02 40 033 972 Request a quote